Light Bright
Arond 200
ATTENTION: EYE DAMAGE! Do not look into the light source for a long
time during operation. This can be harmful to the eyes. Possibly
dangerous radiation.
If the device was exposed to strong temperature fluctuations (e.g. after transport), the device
must not be switched on immediately. The resulting condensation water can damage your
device. Leave the device switched off until it has reached room temperature.
Do not shake or bump the device. Avoid brute force during installation or operation.
This spotlight was designed for indoor use only. Do not expose this unit to rain or moisture.
When choosing the mounting location, make sure that the device is not exposed to extreme
heat, humidity or dust.
Ventilation openings and slits in the head and foot of the headlamp serve for ventilation. To
ensure reliable operation of the device and to protect it from overheating, these openings
must not be covered.
Never cover the front lens when the headlight is in use.
The openings should never be covered with fabrics or other objects so that the airways are
blocked.
This unit must not be operated in an environment without adequate ventilation.
The unit may only be operated when the housing is closed and all screws / omega head
screws are tightened.
The device must always be secured with an additional safety device.
Make sure that the area underneath the spotlight is clear during installation, conversion and
dismantling.
ATTENTION: The distance between the light emission and the
illuminated surface must be at least 2.0 meters.
The front lens must be replaced if it is visibly damaged so that its
function is impaired, e.g. by cracks or deep scratches!
To avoid damage to the internal parts of the lamp head, never let
sunlight shine directly into the front lens.
5
