bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 6
Light Touch LT1021 Series – User Guide v2.1 | Page 6
The Basics
Getting Started
1.
Remove from packaging
Check package contents against list on page 3.
2.
Place unit upright on flat surface
Place the unit on a flat, level surface. For uniform results, a matte white
surface is recommended.
3.
Press the button on top of the unit
This will turn on the unit. A blue logo will be projected for a few seconds
whilst the software loads. Light Touch™ will display a carousel menu which
provides access to a selection of preloaded demonstration applications.
4.
Touch the projected image to interact
The menu can be navigated by touching the projected image with a finger
and using standard actions such as swipe and click. A touch is registered
when the finger lifts up from the projection surface, and not when the finger
is pressed down.
Demonstration Applications
The Light Touch LT1021 unit comes preloaded with a number of
demonstration applications, which can be accessed via the carousel. A
category can be selected by a single “click” on any visible icon.
Figure 2 – Screenshot of carousel menu
The pre-loaded applications are provided for demonstration purposes
only. Please contact Light Blue Optics for further information if required,
including enquiries about obtaining permission to use part or all of one of
these applications in a commercial product.
For information on creating applications for Light Touch, see the separate
document entitled: ‘Light Touch Application Guide’.