bbb
Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 12
Light Touch LT1021 Series – User Guide v2.1 | Page 12
The virtual keyboard can switch between three screens by pressing the mode
key (marked as *%123) in the image below. When the code has been entered,
press the green arrow button to connect.
Figure 11 – Screenshot of entering network access code
At the main screen of the wireless networking control panel, the status of the
connection will be displayed. Pressing the ‘Test’ button with cause the
application to actively test the wireless network connection. If successful, the
following screen will be shown. If unsuccessful, a similar screen will say that
you are not connected to the internet.
Figure 12 – Screenshot of networking control panel showing network test
Light Touch can also connect to wireless networks that don’t broadcast their
SSIDs. To connect to a network with a hidden SSID, select ‘Other’ from the
list of available networks and press ‘Connect’.