manualshive.com logo in svg

Light Blue Optics LT1021FC, User Manual, Page: 14 / 28

Share
Download
Light Blue Optics LT1021FC User Manual Download Page 14

   

bbb 

Light Touch LT1020 – User Guide v1.1 – Application Release C1.0.0 | Page 14

Light Touch LT1021 Series – User Guide v2.1 | Page 14

USB Mode 

Light Touch can be connected to a host machine via a USB cable that plugs 
into the USB Micro-B port. The USB Mode control panel can be accessed 
from the ‘Settings’ menu: 

 

Figure 14 – Screenshot of ‘USB Mode’ icon within ‘Settings’ menu 

The default USB mode is ‘ActiveSync’ mode, which allows Light Touch to be 
controlled from a Microsoft Windows PC. Further details are available in the 
separate ‘Application Guide’ document.  

In order to connect using USB ActiveSync mode, a device driver is needed 
for the host PC. Instruction relating to the installation and use of these drivers 
is contained in the appendices of this document. 

Light Touch also supports ‘USB Mass Storage’ mode, which allows Light 
Touch to appear as an external drive to a host PC or Mac.  

Mass storage mode supports a higher transfer rate and the ability to connect 
without using a device driver. However, whilst Light Touch is connected as a 
mass storage device, it cannot access its own file system.  

The main screen of the USB Mode control panel allows the connection type 
to be selected as shown below. 

 

Figure 15 – Screenshot of selecting USB mode 

Summary of Contents for LT1021FC





























Reviews:

No comments