LIFT eFOIL 4'4 Pro, Instruction Manual, Page: 37 / 48

GOVERNOR MODE
LIFT BATTERY LIFE INDICATOR
• The hand controller’s home screen displays the battery level of the
main battery inside the board, indicating how much ride is remaining.
CAUTION: The Lift eFoil will automatically reduce power and enter
into a “limp mode” when there is only 10% battery left. This indicates
you need to return to shore and recharge the battery.
Be aware of the screen for low battery, hot battery, hot motor, hot
electrical contacts, low hand controller battery, and other warnings.
SERIALIZATION
• The HIN number of the Lift eFoil is located on the starboard side of
the board near the tail. Please verify that your documents match the
board’s HIN number.
• The serial number of the receiver box is located under the white
phase connectors.
• The battery serial number is located near the battery handle.
• A white manilla envelope containing all of the paperwork to
register your board is included with your eFoil.
37
Disclaimer: As your Lift eFoil is a powered VESELL, we recommend all boards
to be registered properly according to your local rules and regulations.
• Governor mode limits the maximum throttle output, which allows
riding at reduced speeds.
• To set governor mode, make sure the hand controller is powered
on and then press the “set” button just below the screen. Press “set”
again to lock in the governor setting. Your motor power level will be
displayed.
• Press the (+) or (-) button to increase or decrease your power level
from 15 total settings.
• The home screen will display the battery level and will indicate that
governor mode is active.