manualshive.com logo in svg

LIFT eFOIL 4'4 Pro, Instruction Manual, Page: 13 / 48

Share
Download
LIFT eFOIL 4'4 Pro Instruction Manual Download Page 13

DO NOT disassemble or attempt to modify or service. 
No serviceable parts inside.

DO NOT use for any purpose other than that intended.

DO NOT mishandle, drop, or damage in any way.

DO NOT puncture the battery.

DO NOT expose the battery to fire or elevated temperatures (>60 deg C). 

Inspect the battery before every use. If damaged, do not use. Exposure 
of a damaged pack to water could result in shock, fire, arc flash, serious 
injury, or death. 

Transport this unit in accordance with all applicable laws.

DO NOT dispose of this unit. Recycling or disposal of lithium-ion batteries 
requires specialized facilities. 

Only charge using the unit provided.

DO NOT leave the battery unattended while charging.

DO NOT handle the battery and electronics with wet hands.

DO NOT drop the battery. Do not use the product’s battery if it is 
damaged. Damage to the battery may result in a fire.

DO NOT connect the battery or any electronics while in the water. 
Assemble all items on the shore in a dry environment.

BATTERY

DO NOT ATTEMPT TO OPEN THE WATERPROOF 
HATCH COMPARTMENT WHILE IN THE WATER 
FOR ANY REASON.

13

Summary of Contents for eFOIL 4'4 Pro

















































Reviews:

No comments