LIFT eFOIL 4'4 Pro, Instruction Manual, Page: 36 / 48

1. Confirm the receiver box is turned on.
2. Turn off the hand controller.
3. Press and hold the (-), (+) buttons, and then the power button.
4. The hand controller screen will show a Bluetooth logo, indicating
that it is in pairing mode. If this screen does not appear, turn off the
hand controller and repeat the above process to enter pairing mode.
5. After the controller is in pairing mode, press and hold the black
relay button on the electrical box (located near the blue water tubing)
for up to 3 seconds. The blue startup button will flash and the hand
controller will display the governor mode / power level.
PAIRING HAND CONTROLLER VIA BLUETOOTH
If the screen on the hand controller is indicating “no signal,” the hand
controller is not paired with the board or the board is turned off.
To pair the hand controller:
PAIRING THE CONTROLLER
36