Page 57
Monitoring Period
This section describes the steps that you need to know if you exit the
ACT application after first time activation and additional information
about the monitoring period.
The recommended distance between the cell phone monitor and
sensor is within 20 inches (50 cm) (see Cell Phone Monitor Placement
section).
NOTE:
verify the sensor lead wire is connected to the sensor, as
described in the Troubleshooting section (for ACT III with Flip Open
Battery Cover).
1.
Connect the sensor electrodes (as shown in Figures 7 and 8).
2.
Turn on the cell phone monitor, press and hold the POWER button
of the cell phone monitor for 5 seconds until the screen lights up.
3.
After a few seconds the screen on the cell phone monitor will
display the ACT opening pages.
After a few seconds the
screen on the cell phone
monitor will display the ACT
opening page.