14
SP-870
OPERATION ORDER
1.
Install 2 x 1.5V UM-4 or AAA batteries. The screen will display in accordance with
(Picture A)
and “Beep” at the same time. It will then enter to standby mode (Picture B).
2.
Use the SET button to preset values for TIME/DISTANCE/CALORIES/PULSE. SET
alters the value for a specific category. MODE confirms a set value.
3.
The values RPM/SPEED/TIME/DISTANCE/CALORIES/PULSE will start increasing as
soon as the sensor receives a signal that you are pedalling.
If preset values have been set, the mo
nitor will ‘beep’ for 8 seconds once the function
counts down to 0. The function will then immediately count up from 0 if the workout is
continued. During this, press MODE to confirm and skip to the next set up option.
Picture A
Picture B
