16
EXER-57
6.
COMPUTER OPERATION
BUTTONS:
1. MODE:
a. Press to change over display mode or choose the window needs to be set.
2. RECOVERY / UP:
a. In setting status, press this button to increase setting value in the relevant flashing
window for TIME, DIST, CAL and TEMP
b. In non-exercise or non-setting status, press this button to enter/exit pulse recovery
function.
3. DOWN
a. In setting status, press this button to decrease setting value in the relevant flashing
window for TIME, DIST, CAL and TEMP
4. RESET/GO
a. In setting status, press this button to reset the value in relevant flashing window for
TIME, DIST and CAL.
b. In parameters setting status for body fat, press this button to enter body fat test.
c. In monitor status, hold this button for 3 seconds to reset all values to zero.
5. BODYFAT
a. In non-exercise status, press this button to enter/exit body fat parameters set-up.
FUNCTIONS:
1. SPEED/BODYFAT RATIO/RPM WINDOWS (IF APPLICABLE)
a. Displays instantaneous speed and the range is 0.0~99.9KM/H. The maximum pickup
signal is 1500rpm.
b. Displays current revolutions per minute (RPM) during exercise. It reflects the pedal
frequency. The range is 0~1500 rate per minute. (if applicable)
c. Displays Body fat ratio.
2. TIME/BMI
a. Counts the total time from exercise start to the end. Range is 0 ~ 99M59S.
b. Exercise time can be set in advance, when it approaches the present time, the monitor
will alarm for 10 seconds. The maximum pre-set time is 99 minutes.
c. Display Body Mass Index (BMI).
3. DISTANCE/BMR
a. Counts the total distance from exercise start to the end and the range is 0.00 ~ 9.99 ~
99.9KM.
