LifeSpan EXER-11, Owner'S Manual

Page: 12 / 16

12
6. COMPUTER OPERATION
SPECIFICATIONS:
TIME------------------------------------------0:00~99:59MIN
SPEED---------------------------------------0.0~999.9ML/H(KM/H)
DISTRANCE--------------------------------0.00~9999ML (KM)
CALORIE------------------------------------0.0~9999KCAL
TOTAL DIST(ODO)----------------------- 0.00~9999ML (KM)
PULSE (IF HAVE) ------------------------ 40~240BPM
KEY FUNCTION:
FUNCTIONS:
NOTE
1. Without any signal coming in 4-5 minutes, the LCD display will be shut off automatically.
2. When there is signal input, the monitor will automatically turn on.
3. If display is not turning on or is not clear, change to new batteries.
4. The monitor use 2pcs of 1.5v “AAA” batteries.
ITEM DESCRIPTION
MODE - This key lets you to select and lock on to a function you want. Pressing and hold for 3
seconds to reset the value to zero (without ODO).
SET - To set the values of TIME, DISTANCE, PULSE when not in scan mode. When starting
exercise, the "SET” values of counted will be backwards. When the value of "SET" reaches
0, it’s will be restored.
RESET - In the SET mode, pressing the RESET key to reset the value to zero.
ITEM DESCRIPTION
TIME
- Press the MODE key until pointer advance to TIME. The total working
time will be displayed when starting the exercise.
SPEED
- Press the MODE key until pointer advance to SPEED. The current
speed will be displayed when starting the exercise.
DISTANCE
- Press the MODE key until pointer advance to DISTANCE. The distance
of each workout will be displayed when starting the exercise.
CALORIE
- Press the MODE key until pointer advance to CALORIE. The calorie
burned will be displayed when starting the exercise.
ODO
- Press the MODE key until the pointer advance to ODOMETER. The total
accumulated distance will be shown.
PULSE (if
present)
- Press the MODE key until the pointer advance to PULSE function and
the hold both handlebars of the sensor for about 3 seconds.
SCAN
- Display changes according to the next diagram every 6 seconds.
Automatically display of the following functions in the order displayed:
TIME---SPEED---DISTANCE---CALORIE---ODO---PULSE (if have) ---