background image

 

22

Place the treadmill on a level surface. Run the treadmill at approximately 4km/h, checking the running 
condition.

5. ADJUSTING THE RUNNING BELT

If the belt has drifted to the right:  Whilst the 
treadmill is running at 4km/h, carefully turn 
the right adjusting bolt 1/4 turn clockwise. Then 
monitor treadmill until the belt centers. Repeat 
until the belt correctly centers.

See Picture A

If you have over adjusted the belt and it drifts 
to the right, carefully turn the right adjusting 
bolt anticlockwise until the belt centers.

A

If the belt has drifted to the left:  Whilst the 
treadmill is running at 4km/h, carefully turn 
the left adjusting bolt 1/4 turn clockwise. Then 
monitor treadmill until the belt centers. Repeat 
until the belt correctly centers.

See Picture B

If you have over adjusted it, carefully turn the 
left adjusting bolt anticlockwise and until the 
belt centers.

B

C

To adjust the tightness of the belt:  Turn the 
treadmill off. Turn both the left and right 
adjusting bolts 1/4 turn clockwise. Repeat until 
the belt correctly tightens.

See Picture C

If the belt is over tightened, simply do the 
opposite to loosen.

|  MAINTENANCE INSTRUCTIONS

Summary of Contents for Chaser 3

































Reviews: