14
3.1 START-UP QUICKLY (MANUAL):
Place the safety key on display and attach the other end to your clothing then press ‘START’ button.
The treadmill will run at the lowest speed after a 3 second countdown.
Press SPEED +/- to adjust the speed.
Press the ‘STOP’ button or take out the safety key directly to stop the treadmill.
3.2 COUNT DOWN MODE:
Press the ‘MODE’ button, it can choose time countdown mode, distance count down mode, calories
countdown mode, and the window will show the default data and blink.
Use the SPEED +/- to set the data.
Press ‘START’ button, the machine will run at the lowest speed, you can press SPEED +/- to change the
speed. When it counts down to 0, the machine will stop smoothly. Certainly, you can press ‘STOP’ button
or take out the safety key from the computer to stop the machine.
3.3 INNER INSTALL PROGRAM:
Press ‘PROG’ button to choose the inner install program from P1----P15.
When setting the program, the time window will show default data and blink, press SPEED button to set
the running time. Each program has been divided into 20 sections.
Each exercise time = the setting time divide by 20.
3. MAIN FUNCTION
"START" Button:
Press this button to start the machine, the machine will run at the lowest speed
or at the speed of default program.
2. KEY FUNCTION
| OPERATION GUIDE
"STOP" Button:
Pause/stop key. In the running state of the treadmill, press this key to pause
the treadmill. Press this key again, the machine will slow the speed still stop and all data will be
cleared.
"PROG" Button:
Press this button to choose program from manual mode—P1---P15---FAT.
"MODE" Button:
In the normal mode of the manual program P0, press this button to choose 4
different operating modes: time countdown mode, distance countdown mode, calorie countdown
mode, and normal mode.
SPEED+/-:
Adjust the speed. Press the button to adjust the speed when running and to adjust the
data when stopped.
SPEED (3,6,9,12):
Adjust the speed quickly.
Turn on the power switch at the back of motor cover, the display window will light up. The machine will
enter ready state.
