background image

6

Warranty

Warranty

This LifeSpan desk bike comes with the following limited warranty valid in North 

America and the United Kingdom. If you are outside of these areas contact your 

local distributor for warranty information or visit  

www.LifeSpanFitness.com.

 

LifeSpan warrants that the equipment it manufactures is free from defects in 

materials and workmanship under normal use and services. The periods above 

are based on the date of purchase. During these periods, LifeSpan will repair 

or replace any defective part. Free labor is included on all parts that are not 

normally assembled or replaced by the customer within the labor period.

If within the time frames specified above, any part fails to operate properly, 

login to our website at www.LifeSpanFitness.com, click on “Customer Service” 

and complete the form to request assistance or call 877.654.3837 option 4 for a 

Customer Service Agent (please note that certain kinds of service should only 

be performed by a qualified service technician).

LifeSpan reserves the right to make changes and improvements to our products 

without incurring any obligations to similarly alter any product purchased. 

In order to insure our product warranty and to ensure the safe and efficient 

operation of your LifeSpan product, only authorized parts can be used. The 

warranty is void if any parts other than those provided by LifeSpan are used.

Exclusions and Limitations:

•  This warranty does not apply to any defects caused by negligence, misuse, 

improper assembly, or maintenance, accident, or “act of God.”

•  This warranty does not apply to discoloration of paints or plastics.
•  LifeSpan shall not be responsible for incidental or consequential damages. 
•  This warranty is non-transferable from the original owner.

Registration
Should you need to process a warranty claim make sure you retain your 

purchase receipt to verify the date of purchase and register your LifeSpan 

product online.  To complete the registration go to www.LifeSpanFitness.com 

and select “Product Registration”. 

 

C3-DT Desk Bike

Frame
Parts
Labor

 DT3

Parts

6 Hr/Day

Lifetime

2 Years

1 Year

2 Years

Summary of Contents for C3-DT

























Reviews: