14
Step 1: Remove Components from Box
A.
Remove plastic bags and lay all parts out on the floor.
B.
Locate the hardware bag.
Step 2: Rear Support Assembly
A.
Place the
Main Frame Assembly (1)
on a solid level surface. It may be
necessary to prop the back of the frame up slightly to give clearance for
step B.
B.
Align the
Rear Support Assembly (3)
with the
Main Frame Rear Bracket (A)
.
C.
Install two long
M8x70L Bolts (8)
and
Curve Washers (9)
, found in the
hardware bag, through the
Rear Support Assembly (3)
and into the
Main
Frame Rear Bracket (A)
. Do not tighten bolts yet.
D. Insert two short
M8 Boltsx16L (10)
and
Curved Washers (9)
through
the top of the
Main Frame Rear Bracket (A)
and into the
Rear Support
Assembly (3)
. Do not tighten bolts yet.
E.
Securely tighten the two long
M8x70L Bolts (8)
first, then tighten the two
short
M8x16L Bolts (10)
.
Assembling Your C3-DT Desk Bike
1
A
3
10
9
9
8
