LifeSpan BOOMER PLUS User Manual Download

Page: 12 / 18

value is from 0.5 to 99:9.

4. When the distance is in the mode of counting down, press “DISPLAY MODE” and the

calories will begin to count down. The CAL window will display the flashing number
“50”. Press the “SPEED+”, “SPEED-“ to set the desired distance. Setting value is from
10 to 999.

5. After setting, press START, the treadmill will start after 3 seconds. Press the “SPEED+”,

“SPEED-“ to change the incline and the speed. Press STOP to stop the treadmill.

EXERCISE IN INNER MODE

There  are  24  manual  mode  P01-P24.  Press  “PROGRAM”  button,  the  windows  speed
show ”PRO”, ”TIME/DISTANCE” shows “P-XX”, you can choose the mode by pressing”
SPEED+” or “SPEED –“ the mode is from P01 to P24. “TIME/DIST” window is on when you
press  “MODE”  button.  The  presetting  time  is  30:00.  You  can  set  how  long  you  will
exercise by pressing “SPEED+” or “SPEED –“.(Please press “MODE” button if you want to
come  back  to  manual  program;  press  “PROGRAM”  button  if  you  want  to  exit).  Press
“START” button to start-up the manual program. They are shown 20 sections , exercising
time is setting time/20. The systems will make the noise “Bi-Bi-Bi” when it enters the
next section. The system speed will change according to the program’s changing. You can
press “SPEED+” or “SPEED –“ to change the speed. The system will show the speed in this
section when it enters the next section.

USER DEFINED PROGRAM

There are 3 User defined program: U-01,U-02,U-03 except 24 system manual programs
1. User’s defined program:

Insert the safety key then press ”START” two times into the user defined program. The

window SPEED shows “PRO”; The windows TIME/DIST shows “U-XX”, you can choose the
mode  by  pressing”  SPEED+”  or  “SPEED  –“.  You  can  enter  time  setting  by  pressing
“MODE” button after you choose your defined program. The windows TIME/DIST shows
“30:00”,you can choose your time by press ”SPEED +”or “SPEED –“. You can enter time
setting  in  every  section  by  press”  MODE”  button.  The  window  TIME/DIST  shows
“U1.01”,it  shows  that  you  have  finished  the  first  setting.  The  window  SPEED  shows
default speed, then you can adjust to the speed in first section by pressing “SPEED +” or
“SPEED –“. After you finish the speed, then you press “MODE” button to enter the second
section, the window “TIME/DIST” shows “U1.02”. All the datas will be saved until you set
again. These datas will save whether it is off or not.

PRESET PROGRAMS

It will display any of P01~P12 in the RACE TRACK LED window. You only need to preset
the time. There are 20 intervals when running and the speed will change automatically.
Refer the left-bottom charts in the panel.

RANGE OF PROGRAM

SETTING PARAMETER

BEGIN

SETTING

BEGINING VALUE

SET UP RANGE

DISPLAY RANGE

TIME

（

MINUTE

：

SECOND