background image

 

 

 

 

EXER-90H

 

1.   IMPORTANT SAFETY INSTRUCTIONS 

 

 
WARNING 

Read all instructions before using this machine.

 

It is important your machine receives regular maintenance to prolong its useful life. Failing to 

regularly maintain your machine may void your warranty. 

 

 
 

Please keep this manual with you at all times 

a. 

It is important to read this entire manual before assembling and using the equipment. Safe and 

effective use can only be achieved if the equipment is assembled, maintained and used properly.  

Please note: It is your responsibility to ensure that all users of the equipment are informed of all 

warnings and precautions. 

b. 

Before starting any exercise program you should consult your doctor to determine if you have any 

medical or physical conditions that could put your health and safety at risk, or prevent you from using 

the equipment properly. Your doctor’s advice is essential if you are taking medication that affects your 

heart rate, blood pressure or cholesterol level. 

c. 

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop 

exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular 

heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do 

experience any of these symptoms, you should consult your doctor before continuing with your 

exercise program.  

d. 

Keep children and pets away from the equipment. This equipment is designed for adult use only. 

e. 

Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To 

ensure safety, the equipment should have at least 2 meters of free space around it. 

f. 

Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any 

unusual noises coming from the equipment during use and assembly, stop immediately. Do not use the 

equipment until the problem has been rectified.  

g. 

Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught in 

Summary of Contents for EXER-90H

























Reviews: