17
EXER-90H
Figure 32
Figure 33
Figure 34
Figure 35
Figure 36
Figure 37
Figure 38
3.5 Target TIME mode:
1. In Standby mode, press Target Time key then go to
mode. TIME will light up, along with a
long sound for 1s.
2. TIME value is flashing, press UP and DOWN to adjust value (Figure 39) and press ENTER to
confirm meanwhile buzzer beeps 1s and TARGET TIME lasting lighting up.
3. Preset value & workout time switch to display in every 5s until counts down to 0, then DISTANCE,
CALORIES, WATTS, SPEEED, RPM start to count up. (Figure 40)
4. Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s per second within
30s. All values are displaying on LCD and flashing in every 2s. If continue to stop training for 5
minutes, buzzer sounds 2s and enter to Wake-up mode. Press START to resume workout.
5. No signal inputs for 30s, buzzer sounds 1 short beep and enter to Wake-up mode.
6. Press STOP or end up training, TIME will display total workout time; DISTANCE will display total
workout distance; CALORIES will display total consumption during workout; WATT, SPEED and
RPM will switch to display AVG. & MAX. in every 5s.
7. With pulse signal input, PULSE window will display user actual pulse and 65%, 85% MAX (Figure
21~23). Pulse window displays nothing if no pulse signal input (Figure 19~20).
8. Press any PROGRAM key then perform the program accordingly.
