background image

9   

   

plugged into that circuit or outlet

). If unsure your circuit meets these requirements, verify with a certified 

electrician

. Risk of fire, damage to property, or injury may result if requirements are not met.  

 

Why   does   my   heater’s   fan   continue   to   run   after   the   set   temperature   is   reached   or   the   power   is   turned   
off?   

This is normal

. The heater’s fan will continue to run, even after the heater automatically cycles down. The 

fan continues to run so that every last bit of heat is blown out of the heat chamber, while allowing the unit to 
continue filtering your air. Once the internal box/components cool completely, the fan should then shut off on 
its own. In this case, allow a few minutes after the heat cycles off (with power on). The fan will shut off faster 
when the power is turned off.    

  

Why   doesn’t   the   fan   speed   increase   when   I   change   the   setting   from   Low   to   High?   

This is normal

. The heater’s fan’s speed is not affected by the High/Low settings. The fan is designed to 

vent the heat at one soft, comfortable, and energy efficient speed.  What is affected by the High setting is the 
heat output. In essence, in the High mode, the heater produces “more” heat, rather than “faster” heat. 

 

 

I   want   to   make   sure   my   warranty   is   registered.   What   do   I   send   to   make   sure   it   is   registered?   
Where   do   I   send   it?   

The heater comes with an automatic 1 year limited manufacturer’s warranty at the time of purchase. Your 
receipt is considered your proof of purchase and registration. Keep it in a safe place.  As long as it is legible, 
a copy may be used for any future warranty claims (if requested). If you have access to e-mail, and would 
like peace of mind, e-mail us to: 

[email protected]

  

In the body of the e-mail, include your 

full name, address, phone number, model, serial number, and scanned copy of your legible receipt. You may 
also register in the “registration” tab at: 

www.lifesmartproducts.com.

 

 

My   heater   does   not   perform   as   well   as   another   brand   heater   that   I   purchased.   Why   Not?   

There are many brands of heaters on the market. Each brand is designed with different heat specifications, 
designs, trademarks, fan speeds, colors, material types, displays, and electrical components. They are 
manufactured this way for you, as the consumer to have choices, selection, and preferences. As long as the 
unit functions as specifications indicate, comparison to other brands will ultimately depend on individual 
consumer perception.  

 

I   purchased   my   heater   so   that   it   could   cut   my   heating   costs,   but   my   electric   bill   has   gone   up.   Why?   

The compact LIFESMART heater can definitely save you on heating costs, when compared to the existing 
central heating system in your home, and when used as supplemental heat. Your heater is designed to give 
your main heat source a supplement “boost,” or allow for you to have extra heat (in the form of soft infrared 
waves) in locations where you would otherwise be short. It is meant to cycle on and off as it provides the 

Summary of Contents for LS-8WQH-MEN13



















Reviews: