13
USER’S GUIDE
Plug your Infrared Heater power cord into a 120V, 15amp (or higher) three-prong receptacle.
To Turn the Heater On:
1. Turn the Master toggle switch in the back of the heater
to the “On/Lit” position.
2. Press the “
Power
” button on the front control panel or “ON/OFF” button on the remote
control.
Heater Default Temperature:
The heater’s default temperature every time it is powered “on” is 72°F.
•
Note that the heater will not activate its heat elements or fan, if the starting ambient
temperature (temperature in the room) is above 72°F.
•
If this is the case, the set desired temperature must be first be adjusted above the
ambient temperature.
Ambient Temperature (room temperature)
:
To view the ambient room temperature, press
the “
Temp up
” and “
Temp down
” buttons at the same time for appx 3 seconds. The room
temperature will display for 5 seconds then return to the desired set temperature.
Set Desired Temperature (Goal Temperature)
:
Press the “
Temp up
” or “
Temp down
”
button on the control panel or on the remote control to select the Set Desired Temperature. The
heating process will begin.
•
When the heater detects that the ambient room temperature matches the set desired
temperature, the heating will stop automatically.
