LifeSize Multipoint 230, Installation Manual

Page: 16 / 32

10 <Book title goes here>
LifeSize Multipoint 230 Chassis
L
IFE
S
IZE
M
ULTIPOINT
230
C
HASSIS
"
LifeSize Multipoint 230 Chassis Main Features on page 10
"
Front and Rear Views of the LifeSize Multipoint 230 Chassis on page 11
L
IFE
S
IZE
M
ULTIPOINT
230
C
HASSIS
M
AIN
F
EATURES
The LifeSize Multipoint 230 chassis is a 3U chassis which can hold two LifeSize
LifeSize Multipoint 230 Media Blades and a shelf manager.
The upper LifeSize Multipoint functions as the master blade, providing the single
management interface and controlling both blades in the chassis. The LAN
connection is via the upper blade. The lower LifeSize Multipoint functions as the
slave.
Table 2-1 Chassis Main Features
Field replaceable units (FRUs) All boards, Power Supply Units and fan
drawers are field replaceable units
Hot swap All FRUs are hot-swappable—removing or
replacing an FRU (except a Power Supply
Unit) does not affect the operation of other
FRUs.
Grounding and electrostatic discharge
"
The chassis includes an external
GND 4mm stud as per the TUV
requirement).
"
The chassis includes 4mm
banana jacks for a 4.5mm plug or
a standard 0.166" plug, as per the
PICMG 3.0 specification.
Cooling The chassis supports a single failed fan in
the fan tray.
Power supply
"
Default AC power supply as the
default choice.
"
Universal 90-264 VAC power
ports.AC power entry includes
regular IEC320-C14 filtered AC
inlet and double pole switch
located in the rear.
"
Thermal shutdown if the unit
heats up beyond its limits.