5
DM00003 Rev D
SYSTEM
MANUAL
This device is not intended for use in conjunction with or in the presence of an electrical surgical unit.
Use of this device in the presence of an electrical surgical unit may cause noise or device malfunction
due to high frequency noise from the electrical surgical unit. Use of this device in conjunction with
an electrical surgical unit may result in shock and burn hazards to the patient or operator, as well as
damage to the device. Completely disconnect the device from the patient before using an electrical
surgical unit.
This Trackit M is not designed for use in or near MRI equipment. Failure to remove all sensor leads
before performing an MRI can result in burn hazards to the patient. Using this equipment in or near
an MRI can result in equipment malfunction due to magnetic noise from the MRI.
Do not connect the Neutral electrode or the Negative connection of any differential sensor to any
grounded connection, as this could result in the electrical shock of the patient.
Ensure that the connector port dust cover is properly installed on the system whenever the
connectors are not connected to prevent damage to the system. Check the connector area for debris
before connecting cables to ensure that they seat properly.
Unauthorized modification of the Trackit M is strictly prohibited, and may result in additional hazards
to the patient and operator.
The Trackit M needs special precautions regarding EMC and needs to be put into service according
to the EMC information provided in this manual.
Portable and mobile RF communications equipment can affect the Trackit M.
Using accessories other than those specifically certified by the manufacturer for use with the Trackit M
may result in increased emissions or decreased immunity.
The Trackit M should not be used adjacent to or stacked with other equipment. If adjacent or stacked
use is necessary, the Trackit M should be observed to verify normal operation in the configuration in
which it will be used.
Safety