manualshive.com logo in svg

LifeGear Orbi trac 28320, Owner'S Manual

Share
Download
LifeGear Orbi trac 28320 Owner'S Manual Download Page 35

 

34 

ADJUSTMENTS 

 
 
Adjusting the Tension Control Knob

   

To increase the tension, turn the tension control 
knob in a clockwise direction.   
To decrease the tension, turn the tension control 
knob

 

in a counterclockwise direction. 

 

 
 
 
 
Adjusting the Rear Stabilizer End Cap

 

Turn the rear stabilizer end cap on the rear stabilizer 
as needed to level the elliptical trainer. 

 
 
 
 
 
 
 
 
Adjusting the Handrail Arms Height

 

Remove both adjustment knobs from the left and right 
handrails.    Then slide left and right handrail arms up 
or down slightly to the desired hole for the suitable 
position.    Lock the left and right handrail arms in 
place by tightening both adjustment knobs in a 
clockwise direction. 

 
 
 
 
 

 
Adjusting the Seat Height

   

Remove the seat height adjustment knob from the 
tube of the main frame.    Then slide the seat post up 
or down slightly to the desired hole for the suitable 
position.    Lock the seat post in place by tightening the 
seat height adjustment knob in a clockwise direction. 

NOTE: Do not set the seat post height any higher 
than the marked line on the seat post. 

Tension Control Knob

 

Rear Stabilizer End Cap 

Adjustment Knob

 

Seat Height 

Adjustment Knob

 

Summary of Contents for Orbi trac 28320








































Reviews:

No comments

Brands by name

Popular brands

Load more brands