manualshive.com logo in svg

LifeGear Orbi trac 28320, Owner'S Manual

Share
Download
LifeGear Orbi trac 28320 Owner'S Manual Download Page 32

 

31 

 

 

 

 

 

 

 

 

STEP 23

 

Remove one M8 Nylon Nut (69), one Ø8.2xØ12x1.5 Washer (42), one M8x57 Hexagon 
Socket Pan Head Cap Bolt (94), and one Ø8x65 Lock Pin (101) from the Waist Twisting Disk 
Support Frame (102).    Remove bolt and nylon nut with the 6mm Allen Wrench and Multi 
Hex Tool provided.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STEP 24

 

Position the Waist Twisting Disk Support Frame (102) in front the Front Stabilizer (50) and 
align bolt holes. 
Attach the Waist Twisting Disk Support Frame (102) onto the front end of the Front Stabilizer 
(50) with one M8 Nylon Nut (69), one Ø8.2xØ12x1.5 Washer (42), and one M8x57 Hexagon 
Socket Pan Head Cap Bolt (94) that were removed.    Tighten bolt and nylon nut with the 
6mm Allen Wrench and Multi Hex Tool provided. 
Finally, insert the Ø8x65 Lock Pin (101) into the holes on the Front Stabilizer (50) and Waist 
Twisting Disk Support Frame (102) to lock the Waist Twisting Disk Support Frame (102) in 
place. 

101

9

4

4

2

102

6

9

102

Allen Wrench 6mm 

101

9

4

4

2

101

5

0

102

6

9

9

5

5

0

5

0

102

9

5

Allen Wrench 6mm 

Summary of Contents for Orbi trac 28320








































Reviews:

No comments

Brands by name

Popular brands

Load more brands