10
4. Handlebar Installation
Insert the Hand Pulse Sensor Wires (49) into the hole on the Handlebar Post (7) then pull
them out from the top end of the Handlebar Post (7).
Place the Handlebar (8) through clamp on the Handlebar Post (7) with hand pulse sensors
facing the seat.
Hold the Handlebar (8) in desired position and fasten Clamp Cover (56), Ø12x20 Spacer
(57), and Handlebar T-Knob (64) onto clamp. Tighten the Handlebar T-Knob (64) after
adjustment.
NOTE:
Handlebar T-Knob should be tightly secured before using.
56 57 64
8
7
49