15
6. Computer Installation
Remove four M5x12 Bolts (57) from the back of the Computer (56). Remove bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Remove the Wire Grommet (6) from the hole on the Front Post (5).
Insert both Hand Pulse Sensor Wires (58) into the hole on the Front Post (5) and then pull
them out from the top end of the Front Post (5).
Install the removed Wire Grommet (6) back into the hole on the Front Post (5).
Connect the Extension Sensor Wire (67) and Hand Pulse Sensor Wires (58) to the wires that
come from the Computer (56) and then attach the Computer (56) onto the top end of the
Front Post (5) with four M5x12 Bolts (57) that were removed. Tighten bolts with the Multi
Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips Screwdriver
S8, S13, S14, S15
Tool:
5
56
67
57
58