background image

z

This product must be grounded. If it should malfunction or break down, grounding provides a path 
of least resistance for electric current - reducing the risk of electric shock. This treadmill is 
equipped with a cord having an equipment grounding connector and a grounding plug. The plug 

must be plugged into an appropriate outlet that is properly installed and grounded in accordance 
with all local codes and ordinances.

DANGER: Improper connection of the treadmill grounding connector can result in the risk of 

electric shock. Check with a qualified electrician, if you are in doubt as to whether the 

product is properly grounded. Do not modify the plug provided with the treadmill. If it 

will not fit your outlet, have a properly grounded outlet installed by a qualified 
electrician.

z

This unit must be plugged into a nominal 230 volt 50/60 hz, which has a grounding. 

z

Keep hands clear of all moving parts. Never place hands, feet under the treadmill.

z

Do not use the treadmill on a carpet that is greater than 1/2 inch in height.

z

Before each use, check that the running belt is aligned and centered on the treadmill bed and all 

visible fasteners on the treadmill are sufficiently tightened and secure.

WARNING

: BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN. THIS IS

ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PEOPLE WITH PRE-EXISTING
HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. WE
ASSUME NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR
THROUGH THE USE OF THIS PRODUCT.
DO NOT OPERATE THIS EXERCISE EQUIPMENT WITHOUT PROPERLY FITTED GUARDS, AS THE
MOVING PARTS CAN PRESENT A RISK OF SERIOUS INJURY TO YOUNG CHILDREN.
CAUTION: Read all instructions carefully before operating this product. Retain this Owner's Manual 

for future reference.

3

Summary of Contents for 97320

























Reviews: