8
3. Saddle Installation
Loosen both M8 Nuts (77) from underneath of the Saddle (15) with the Multi Hex Tool with
Phillips Screwdriver provided. Then install the Saddle (15) onto the Saddle Sliding Tube
(56) and secure with both M8 Nuts (77) that were loosened. Tighten both M8 Nuts (77) with
the Multi Hex Tool with Phillips Screwdriver provided.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
4. Handlebar
Installation
Attach the Handlebar (9) onto the Handlebar Post (13) with four Ø8 Washers (3) and four
M8x12 Bolts (11).
11
3
9
13
Allen Wrench 6mm
Tool:
4 Washers (Ø8)
4 Bolts (M8x12)
Hardware:
15
56
Tool:
Multi Hex Tool with Phillips Screwdriver
S13, S14, S15
15
77