11
ADJUSTMENTS
Adjusting the Rear Stabilizer End Cap
Turn the Rear Stabilizer End Cap on the rear stabilizer as needed to level the bike.
Adjusting the Brake Knob
To increase the load, turn the Brake Knob in a clockwise direction.
To decrease the load, turn the Brake Knob in a counterclockwise direction.
Adjusting the Handlebar Height
Release the Locking Knob and then loosen the Round Knob by turning counterclockwise
direction until it can be pulled out. Pull out the Round Knob and then slide the Handlebar
Post up or down direction to the suitable position. Lock the Handlebar Post in place by
releasing the Round Knob and sliding the Handlebar Post up or down slightly until the Round
Knob "pops" down into the locked position. For added safety, tighten the Locking Knob and
Round Knob in a clockwise direction.
NOTE: When adjusting the height of handlebar, the STOP line cannot higher than the
edge of plastic bushing.
Rear Stabilizer End Cap
Brake Knob
Round Knob
Locking Knob
