15
8. Computer Bracket and Computer Installation
Remove two ST4.2x20mm Screws (4) from the Front Handlebar (7). Remove screws with
a Multi Hex Tool with Phillips Screwdriver provided.
Connect the Computer Extension Wires A (85) and Hand Pulse Sensor Extension Wires D
(87) from the Front Handlebar (7) to the wires that come from the Computer (1).
Attach the Computer (1) onto the top end of the Front Handlebar (7) with two ST4.2x20mm
Screws (4) that were removed. Tighten screws with a Multi Hex Tool with Phillips
Screwdriver provided.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
9. AC Adapter Installation
Plug one end of the AC Adapter (77) into the power jack of the
Power Supply Wire (89) on
the front of the Right Shroud (33R).
Before plugging in, make sure to check carefully
the specifications on the Adapter.
Plug the other end of the AC Adapter (77) into the
electrical wall outlet
.
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
1
4
7
85
85
87
87
4
77
89
33R
Summary of Contents for 26690
Page 21: ...20 ...