13
6. Seat/Back Cushions and Rear Handlebar Installation
Remove eight M6x15 Bolts (80) and eight Ø6xØ18x1.5t Washers (79) from the back of the
Seat and Back Cushions (81, 84). Remove bolts with the Multi Hex Tool with Phillips
Screwdriver provided. Then attach the Seat and Back Cushions (81, 84) onto the Back
and Seat Support Bracket (82) with eight M6x15 Bolts (80) and eight Ø6xØ18x1.5t Washers
(79) that were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver
provided.
Attach the Rear Handlebar (78) onto the Back and Seat Support Bracket (82) with two
M8x45 Bolts (14), two Ø20xØ8x2.0t Washers (68), two Ø16xØ8x1.5t Washers (53), and two
M8 Cap Nuts (69). Tighten bolts and cap nuts with the Multi Hex Tool with Phillips
Screwdriver and S6 Allen Wrench provided.
Connect the Hand Pulse Sensor Wires (75) from the Rear Handlebar (78) to the Hand Pulse
Sensor Extension Wire A (61) from the Rear Main Frame (67).
Hardware:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
84
80
82
80
81
79
79
61
67
78
75
68 14
53
69
Allen Wrench S6
(68) Washer
Ø20xØ8x2.0t
2 PCS
(69) Cap Nut M8
2 PCS
(14) Bolt M8x45
2 PCS
(53) Washer
Ø16xØ8x1.5t
2 PCS
Summary of Contents for 26690
Page 21: ...20 ...
