8
2. Front and Rear Stabilizers Installation
Position the Front Stabilizer (2) in front of the Front Main Frame (21) and align bolt holes.
Attach the Front Stabilizer (2) onto the front curve of the Front Main Frame (21) with two
M10 Cap Nuts (3), two Ø10 Curve Washers (4), and two M10x75 Bolts (6). Tighten nuts
with the Multi Hex Tool provided.
Position the Rear Stabilizer (64) behind the Rear Main Frame (46) and align bolt holes.
Attach the Rear Stabilizer (64) onto the rear curve of the Rear Main Frame (46) with two
M10 Cap Nuts (3), two Ø10 Curve Washers (4), and two M10x75 Bolts (6). Tighten nuts
with the Multi Hex Tool provided.
You may turn the Rubber Bolt (80) and M8 Nut (81) on the Rear Main Frame (46) as needed
to level the recumbent bike.
Hardware:
4 Cap Nuts (M10)
4 Curve Washers (Ø10)
4 Bolts (M10x57)
Multi Hex Tool
Tool:
81
80
6
4
3
4 3
6
4
4
3
3
46
21
2
64