12
5. Computer and Seat/Back Cushions Installation
Remove four M5x10 Bolts (29) from the Computer (28). Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Connect the Extension Sensor Wire (26) and Extension Hand Pulse Sensor Wires I (27)
from the Front Handlebar Post (34) to the wires that come from the Computer (28). Tuck
wires into the Front Handlebar Post (34).
Attach the Computer (28) onto the top end of the Front Handlebar Post (34) with four M5x10
Bolts (29) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
Remove eight M6x15 Bolts (49) and eight Ø6xØ18x1.5 Big Washers (50) from the back of
the Seat and Back Cushions (47, 48). Remove bolts with the Multi Hex Tool with Phillips
Screwdriver provided. Then attach the Seat and Back Cushions (47, 48) onto the Back
and Seat Support Bracket (53) with eight M6x15 Bolts (49) and eight Ø6xØ18x1.5 Big
Washers (50) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
29
28
48
47
50
50
50
50
50
49
49
49
49
49
27
26
34
53
