10
4. Install the Handlebar and Computer
Remove two M8x15 Bolts (41) and two Ø8 Curve Washers (51) from the Handlebar Post
(27).
Insert the Hand Pulse Sensor Wires (52) into the hole on the Handlebar Post (27) and then
pull them out from the top end of the Handlebar Post (27).
Attach the Handlebar (25) onto the Handlebar Post (27) with two M8x15 Bolts (41) and two
Ø8 Curve Washers (51) that were removed. Tighten bolts with the Allen Wrench provided.
Connect the Middle Section Sensor Wire (13) and Hand Pulse Sensor Wires (52) to the
wires that come from the Computer (26). Then slide the Computer (26) onto the top end of
the Handlebar Post (27).
13
26
25
27
41
51
51
52
52
Allen Wrench (S6)
Tool:
