Page | 4
Assembly Instructions
The LifeCore 850RBs Recumbent Bike is made from the best materials and has been tested and
received a quality control review prior to its packaging to ensure the correct parts and proper fitting
of each component.
Before assembly of your product, distinguish a proper and appropriate location for the unit where
there is easy access to an electrical outlet with a surge protector. Unpack the box in a clear work
area to allow smooth assembly. Remove all of the parts from the packing material; however, do not
discard packing material until assembly is complete. Double check packing materials to ensure no
missing parts were left behind.
Note that some hardware may be preassembled to components in order to help with assembly; tools
have also been provided to assist with assembly. If you are missing any parts, assembly bags or
need assistance with assembly please call LifeCore Fitness at 1-888-815-5559.
Below are step by step assembly instructions:
Tools Required:
13 mm wrench
15 mm wrench
Philips Screw driver
6mm Allen wrench
5mm Allen wrench
4mm Allen wrench
Step 1: Rear Stabilizer Assembly
Tool Needed:
13mm wrench
(
See Figure 1
) Attach the rear
stabilizer (B1) to the main frame with
bolts (J1), arc washers (J2) and nuts
(J3).
Figure 1
