Page | 12
2.
DISPLAYS
a.
Dot matrix profile window
:
Displays program profile during program setting and executing. The program profile will be different
according to which program is selected.
There are 16 columns of LCD representing 16 segments of time; each segment time
=
total program
time divided by 16 columns. During exercising, a column of LCD will blink to indicate the time
segment you are currently in and show your workout progress.
There are also 16 rows of LCD representing 16 levels of resistance. Each row represents 1 level of
resistance. There is also level display on the right side of dot matrix profile window to display the
resistance level. The appropriated row of LCD will light up when you adjust the resistance level.
b.
Data display windows
: There are 5 data display windows displaying time, rpm/speed,
distance, watt/calories and pulse. During program setting, the appropriated data window will blink to
indicate which data you are setting currently. Press
/
key to adjust the value and ENTER key to
confirm the value.
Note:
i.
During data displaying, speed/RPM window will display speed & RPM each for 5 seconds;
switch back & forth. Same as watt/calories display.
ii.
The default value setting will be updated to the last setting if it has been changed. Pressing &
holding the RESET key for a couple of seconds will reset them back to factory defaults.
iii.
Setting a number besides 0 in those slots will count the number down. If it’s set at 0, it will
count up.
c.
User profile setting window
: During user profile setting, each indicator graphic will light up
to show which setting is selected and dot matrix window will display its value. Press ENTER key to
confirm selection/value or
/
key to change the selection/value.
for gender selection; AGE for age entry; H.t for height entry and W.t for weight entry.
d.
Program category selecting window
: During program category selection, all program
categories will light up and flash. Press
/
key to change the selection and ENTER key to confirm
the category selection. There are 5 program categories: manual, program, watt, personal and H.R.C.
e.
H.R.C. program window
: During H.R.C. program selection, each indicator graphic will light
up to show which H.R.C. program is selected. Press ENTER key to confirm the program selection or
/
key to change the selection. There are 4 H.R.C. programs: TAG (target), 90%, 75% & 55%.
There is also a heart symbol (
) inside this window which blinks every time it picks up a heart rate
signal from the heart rate device.
