LifeCore Fitness LC-1050RBs, User'S Product Manual

Page: 7 / 30

Page | 6
Step 1: Rear Stabilizer Assembly
Tool Needed:
13mm wrench
A. As shown in Figure 1) Remove the pre-
assembled bolts (C3), washers (C4)
and nuts (C5) from the rear stabilizer
(B).
Note: Use page 4 as a reference to
help distinguish correct bolts for
assembly, also add the supplied blue
loctite in the owner’s manual bag to the
threads of each user installed
hardware for added support.
B. Attach the rear stabilizer (B) to the
main frame with bolts (C3), washers
(C4) and nuts (C5).
C. Use a 13mm wrench to fasten nuts
firm.
Step 2: Front Stabilizer Assembly
Note: Apply blue loctite to the threads of
each bolt.
D. As shown in figure 2) Attach the front
stabilizer (B) to the main frame with
bolts (B3), washers (B4) and nuts (B5).
How to Keep the Machine Stable
Note: After the stabilizers are attached
in (Step 1 & Step 2), check to see if the
machine is stable. If the machine is
unstable, adjust the rear end caps (C2)
to level the machine.
Step 3: Back Pad Tube Assembly
Tool Needed:
6mm Allen wrench
Note: Apply blue loctite to the threads of each bolt.
A. Remove the preinstalled bolts (A60) and washers
(J7) from the seat frame.
B. As shown in figure 3) Assemble the back pad
support tube (G) to the seat frame with bolts (A60)
and washers (J7). Use the 6mm Allen wrench to
tighten bolts firm.