Pair with Fitness Devices or Smartphones
Turn on your fitness device or smartphone app. Please be advised that
LifeBEAM does not have its own app.
Note: Make sure to pair your device within 10 minutes from the time you
turn on LifeBEAM.
See the wireless connectivity protocol relevant for your device:
Smartphone Users
Each smartphone app pairs a little differently. Make sure Bluetooth
is turned on and that you have the latest version of your fitness app.
LifeBEAM pairs in the app settings, not in the Bluetooth settings of your
phone as in classic Bluetooth devices. Follow pairing instructions of the
app you are using.
Note: Position the device within 3 meters (9 feet) of the LifeBEAM.
Fitness Device Users
Follow the device-specific instructions for receiving heart rate data from a
chest strap; your device will register the LifeBEAM.
Note: The first time you use your LifeBEAM with a receiving device or app,
you must conduct pairing process.
See FAQ on life-beam.com for the list of supported devices, operating
systems, and sample fitness apps.
Turn on LifeBEAM
Press and hold the power button. The status light turns on and LifeBEAM
Brain beeps three times. While operating, the status light pulses.
Put LifeBEAM on Head
Place the helmet on your head as usual, being careful to establish direct
contact between the sensor and the skin of the forehead
Move hair away from sensor contact point before placing on head.
Do not wear any cap or headband that might disrupt the sensor from
touching your forehead.
Your LifeBEAM Helmet comes with the patented Lazer Rollsys® for
adjusting its fit. Simply twist the Rollsys roller until the helmet fits
comfortably and snugly. Make sure the sensor still touches your forehead
skin.
Note: The helmet should sit level on your head and low on your forehead,
about one or two finger widths above your eyebrow. When shaking your
head, the helmet should not rock from side to side or into your eyes.
See the Lazer Owner’s Manual for complete instructions on helmet
adjustments.
•
•