Important Safety Information
Be sure to read the safety warnings in the accompanying Lazer Owner’s
Manual before continuing.
First Ride
Before using LifeBEAM, peel off the protective film covering the LifeBEAM
Sensor.
Charge Battery
Make sure LifeBEAM Brain is charged BEFORE your first ride.
Lift up the grey rubber
cover to expose the micro
USB charging socket.
Using the cable, connect
the LifeBEAM Brain to a
USB power source.
When light is steady,
disconnect the USB cable
and place back the cover.
1.
2.
3.
LifeBEAM Brain
The LifeBEAM Brain is at the back of the helmet, receiving and sending
your heart rate. It consists of:
On/off power button
A micro USB charging socket
A status light strip for power on/off and battery level
Note: Do not attempt to disconnect LifeBEAM Sensor or LifeBEAM Brain
from the helmet.
•
•
•
Micro USB cover
Status light
Power button
