background image

COLIBRI ONE/TWO DRO

5

1

2

4

3

Specifications are subject to changes without prior notice.
Measured in specific conditions

TECHNICAL SPECIFICATIONS

DESCRIPTION

EN

Opening sensors for automatic doors

Technology:
Transmitter frequency:  
Transmitter radiated power:
Transmitter power density:
Detection mode:
Min. detection speed:
Supply voltage:

Mains frequency:
Max. power consumption:
Output: 
   Max. contact current:      
   Max. contact voltage:
Mounting height: 
Degree of protection:
Temperature range:
Dimensions:
Tilt angles:
Material:
Weight:
Cable length:

microwave doppler radar
24.150 GHz
< 20 dBm EIRP
< 5 mW/cm²
motion
5 cm/s (measured in sensor axis)
12 V to 24 V DC +30% / -10% 

 (The Equipment must be powered by a SELV limited power 

source ensuring double insulation between primary voltages and the Equipment supply. The supple 
current should be limited to 1.5 A.)

50 to 60 Hz
< 2 W

250 mA
50 V DC/V AC
from 1.8 m to 3 m
IP54
from -20 °C to + 55 °C
80 mm (W) x 60 mm (H) x 50 mm (D)
0° to 90° vertical; -30° to +30° lateral
ABS & polycarbonate
70 g
2.5 m

Other use of the device is outside the permitted purpose and can not 
be guaranteed by the manufacturer.
The manufacturer cannot be held responsible for incorrect installations 
or inappropriate adjustments of the sensor.

Please keep for further use

Designed for colour printing

1. 

main connector

2. 

potentiometer for field size adjustment

3. 

LED

4. 

radar antenna (wide field)

5. 

cover

User’s Guide for software version 0100 and higher
 (refer to tracking label on product)

COLIBRI ONE DRO    : Unidirectional detection
COLIBRI TWO DRO   : Bidirectional detection

Reviews: