32
Assembling Your Elliptical
G. The
Lower Arm Joint Cover(10)
comes in two parts. Remove
M4x50L Screws
from pre-assembled
Lower Arm Joint Cover(10A)
. Place
both halves, shown above, around joint
.
Re-attach joint cover with
Phillips head screwdriver and 13mm wrench, making sure nut is seated
in plastic recess.
H. Remove
M4x50L Screws
from pre-assembled
Lower Arm Joint Cover(10B)
.
Place both halves of
Joint Cover(10B)
, as shown above, This will overlap
the front part of
Joint Cover(10A)
just completed in step G. Use the Phillips
head screwdriver,
M4x50L Screws
and
Nuts
to finish attaching.
I. Repeat steps F – I for other side.
5mm Allen
Wrench w/
Phillips
5mm Allen
Wrench w/
Phillips
G
H
PRE-INSTALLED
M4 x 50L
PRE-INSTALLED
M4 x 50L
