5
Fireplace
Installation
!
NOTE:
A 15 Amp, 120 Volt
alternating current (VAC)
circuit is required. A dedicated
circuit is preferred but not
essential in all cases. A
dedicated circuit will be
required if, after installation,
the circuit breaker trips or
blows fuses on a regular basis
when the heater is operating.
Additional appliances on the
same circuit may exceed the
current rating of the circuit
breaker.
WARNING:
Ensure the power
cord is not installed so that
it is pinched or against a
sharp edge and ensure that
the power cord is stored or
secured to avoid tripping or
snagging to reduce the risk of
fire, electric shock or injury to
persons.
Construction and electrical
wiring must comply with local
building codes and other
applicable regulations to
Quick Reference Guide
①
Prior to the first use of the
Sub-Compact Stove verify the
following:
•
Are the circuit breakers for the
unit on?
②
The heater on your Sub-
Compact Stove may emit a slight,
harmless odor when first used.
This odor is a normal condition
caused by the initial heating of
internal heater parts and will not
occur again.
③
If you have any technical
questions or concerns regarding
the operation of your Sub-
Compact Stove, or require service
contact Customer Service at
before returning
the product to the point of
purchase.
