8
Step 1
Connect the Sensor Cable II (23) from the Right Handlebar Support (37R) to the Sensor Cable
III (24) from the Stabilizer (2). Attach the Right and Left Handlebar Supports (37R, 37L) to the
Stabilizer (2) with six M8 Spring Washers (52) and M8x16mm Bolts (70).
Step 2
Connect the Sensor Cable I (22) from the Handlebar (38) to the Sensor Cable II (23) from the
Right Handlebar Support (37R). Attach the Handlebar (38) onto the Right and Left Handlebar
Supports (37R, 37L) with six Ø 18xØ 16x1.5 Washers (72), M8 Spring Washers (52), and
M8x16mm Bolts (70).
Step 3
Connect the Incline Wires (29), Sensor Cable I (22), and Speed Wires (40) to the wires that
come from the Computer (43). Then attach the Computer (43) onto the Handlebar (38) with four
M5 Computer Knobs (25). Finally, install the Safety Tether Key (44) onto the Computer (43).
ASSEMBL
Y
INSTRUCTIONS
38
38
43
43
44
44
37R
37R
37L
37L
38
38
70
70
52
52
72
72
22
22
23
23
70
70
52
52
72
72
70
70
52
52
72
72
72
72
52
52
70
70
22
22
40
40
29
29
37R
37R
70
70
52
52
70
70
52
52
23
23
24
24
52
52
70
70
37L
37L
1
2
3
