11
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (7) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (7) onto the front curve of the Main Frame (1) with two M8x70
Bolts (9), Ø20xØ8 Big Curve Washers (11), and M8 Cap Nuts (12). Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (8) onto the rear curve of the Main Frame (1) with two M8x70
Bolts (9), Ø20xØ8 Big Curve Washers (11), and M8 Cap Nuts (12). Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
4 Bolts (M8x70)
4 Big Curve Washers (Ø20xØ8)
4 Cap Nuts (M8)
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool:
8
1
7
9
11
12
9
12
12
11
11