STEP 7-1:
Slide one Steel Heel Holder Bracket (7) and one Rubber Heel Holder (31) onto one end of the Adjustable
Instep Frame (6) until the lock tooth is wedged into the slot in the Adjustable Instep Frame (6) as
shown in figures A and B. Use the same procedure to attach the other Steel Heel Holder Bracket (7) and
Rubber Heel Holder (31) onto the other end of the Adjustable Instep Frame (6).
Remove the Square End Cap (41) on the back of square bracket of Adjustable Boom (3). Pull out
the Small Spring Knob (17) and then slide the Adjustable Instep Frame (6) completely into the
square bracket. The surface with holes must face toward the Small Spring Knob (17).
Sliding the Adjustable Instep Frame (6) back or forth slightly until the Small Spring Knob (17)
"pops" down into the locked position.
Note:
To slide the Adjustable Instep Frame (6) into the square frame, you must first pull out the
Small Spring Knob (17).
12
6
3
17
23
41
31
7
A
B
6
6
3
17
23
Summary of Contents for 75112
Page 4: ...SAFETY PRECAUTIONS 3 ...