STEP 7-2:
A. Pull the nylon strip on the ring of the Spring (23) to align the ring and holes on bracket.
B. Insert the M6x47 Hex Head Bolt (11) with a Ø 16xØ 6.5x1.0 Washer (27) halfway through the
square bracket, slide the M6x47 Hex Head Bolt (11) through the ring at the bottom of the Spring
(23), slide the M6x47 Hex Head Bolt (11) through the rest of the square bracket, and secure at the
other end with a Ø 16xØ 6.5x1.0 Washer (27) and M6 Lock Nut (16). Attach the Square End Cap (41)
onto the back of square bracket of Adjustable Boom (3) that was removed.
STEP 8:
Pull out the Large Spring Knob (18) and slide the Adjustable Boom (3) into the square bracket on
the bottom of the Bed Frame (4) as shown. Slide the Adjustable Boom (3) upward until the desired
height on the height scale is just below the bracket on the Bed Frame (4). Lock the Adjustable
Boom (3) in place by releasing the Large Spring Knob (18) and sliding the Adjustable Boom (3) up
or down slightly until the Large Spring Knob (18) "pops" down into the locked position. For added
safety, secured the Knob (30) into the back side of the bracket on the Bed Frame (4) as shown.
13
23
3
6
41
23
27
16
27 11
A
B
20
203
21
205
22
208
23
210
203
24
205
25
4
3
30
18
Summary of Contents for 75112
Page 4: ...SAFETY PRECAUTIONS 3 ...
