15
Step 6
Assemble Moving Arms to Pedal Arms; Pedal / Moving Arm
Joint Pivot Covers
Parts:
Hardware Bag #4
(2, 74mm Long Hex Head Bolts)
(2, M10 Hex Nuts)
(4, 8mm Black Phillips Screws)
Tools:
17mm Socket Wrench, Phillips Screwdriver
Lift the front end of the user left pedal lever (K) to meet the left
rocker arm clevis (L). Secure the pedal lever to the rocker arm cle-
vis using one 74mm Long Hex Head Bolts (9) and one 10mm Hex
Nuts (10). Tighten the bolt and nut securely. Repeat the procedure for
the right pedal lever and rocker arm clevis.
Attach the left side lower pivot covers (M) over the moving arm/pedal arm pivot point. Snap the cover together
over the moving arm/pedal arm pivot point and use two 8mm Black Phillips Screws (11) to attach. Repeat for
right side.
NOTE:
Left and right covers are identical.
Summary of Contents for X7
Page 11: ...10 2 ASSEMBLY INSTRUCTIONS Parts List ...
Page 12: ...11 ...
