Version 1. 0 WattRate TFT Computer | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling. com
SETTINGS
GENERAL
When selected, you can change the general settings as entered when the bike was used for the first time.
LANGUAGE:
Selection menu
WEIGHT UNITS:
KG/LBS
DISTANCE UNITS:
KM/MILES
COLOR MODE:
Select TFT color scheme
FRONT LED:
Turn trainer oriented CoachByColor® On/Off
ICG TRAINING APP ADVERT.
Turn QR Code off or on
ICG HEAT TRAINING MODE:
Activates additional animations in the color zone based on your personal
FTP value or your max heartrate.
BIKE ID
During installation each bike can be given its own unique bike identification number. The
identification number is required for use with ICG Connect and App pairing.
BRAKE CALIBRATION
The brake must be calibrated if the displayed level of resistance does not reach 0% or 100% at
the end positions.• An exclamation mark (!) is shown instead of the level as a % on the display.
FOLLOW THE STEP BY STEP DIRECTIONS CAREFULLY AS PROMPTED ON THE DISPAY.
If the values lie outside a certain range, the calibration may fail and a red screen will appear.
Reattempt the calibration and make sure you follow the instructions carefully.
If the calibration fails again, the resistance system must be adjusted mechanically. Please refer to
technical service in this case.