Life Fitness T3, Service Manual

Page: 8 / 67

Section 1 2
Life Fitness T-Series Consumer Treadmills
TROUBLESHOOTING GUIDE
Malfunction Probable Cause Corrective Action
On/Off switch. Turn the switch to the ON position.
Insufficient power source. Plug treadmill into a dedicated circuit.
Using a voltmeter, verify power at outlet.
Verify/Reset 15 amp circuit breaker.
Verify line voltage at P5 on motor controller
pins 1 and 2.
If yes, verify 8 VDC at P1 pins 7 and 8, and
8VDC at P1 pin 6.
If voltage is present, verify continuity and
voltage at the console end of the main cable, If
8VDC is present, replace display console PCB.
If 8 VDC at P1 pins 7 and 8, and 8VDC at P1
pin 6 of the motor controller is not present,
replace motor controller.
Damaged line cord. Replace line cord.
No Power.
Line cord improperly seated in
socket. Inspect power connection at wall outlet and at
machine for proper contact.
No incline.
Home switch disconnected or
damaged. Test in Diagnostics. See Motor Test Mode in
Section 2.
Verify key pad function in diagnostics.
Test lift motor function in diagnostics.
Verify P4 Connector, Pin 2 has AC voltage.
Verify P4 Connector, Pins 1 and 2 have line
current when declining.
Verify P4 Connector, Pins 1 and 3 have line
current when inclining. If voltages are present,
replace lift motor.