background image

HOW TO GET PARTS & SERVICE 

Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time,
and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for
service where your Product is located or advise you on how and where to ship the Product for service. Before shipping: 

1.

Obtain a Return Authorization Number (RA#) from Customer Support Services 

2.

Securely pack your Product (use the original shipping carton, if possible) 

3.

Write the RA# on the outside of the carton 

4.

Insure the Product, and 

5.

Include a letter explaining the defect or problem and a copy of your proof of purchase if you believe the service is covered by warranty 

Life Fitness World Headquarters 
Attn: CSS Help Desk 

5100 N. River Rd. 
Schiller Park, IL. 60176 

EXCLUSIVE WARRANTY 

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON
OUR PART. We neither assume nor authorize any person to assume for us any other obligation or liability concerning the sale of this Product. Under no
circumstances shall we be liable under this warranty, or otherwise, for any damage to any person or property, including any lost profits or lost savings, for
any special, indirect, secondary, incidental or consequential damages of any nature arising out of the use of or inability to use this Product. Some states
do not allow the exclusion or limitation of implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions
may not apply to you. 

CHANGES IN WARRANTY NOT AUTHORIZED 

No one is authorized to change, modify or extend the terms of this limited warranty. 

EFFECT OF STATE LAWS 

This warranty gives you specific legal rights and you may have other rights, which vary, from state to state. 

OUR PLEDGE TO YOU 

Our Products are designed and manufactured to the highest standards. 

We want you completely satisfied with our Products and will do everything possible under the terms of this warranty to keep you secure in knowing you
have bought the best!

Summary of Contents for Signature Signature Smith Machine













Reviews: